Analysis of the maximum friction condition for green body forming in an ANSYS environment

Maurizio Facchinetti; Wiktoria Miszuris

doi:10.1016/j.jeurceramsoc.2016.01.040

Analysis of the maximum friction condition for green body forming in an ANSYS environment

Maurizio Facchinetti, Wiktoria Miszuris

Adran Mathemateg

Allbwn ymchwil: Cyfraniad at gyfnodolyn › Erthygl › adolygiad gan gymheiriaid

16 Dyfyniadau (Scopus)

354 Wedi eu Llwytho i Lawr (Pure)

Crynodeb

Axisymmetric extrusion of an elasto-plastic material with the maximal shear stress condition between the material and the forming tool is considered. The elastic component of deformation is assumed negligible in comparison with its plastic part. Challenges related to the numerical modeling of such a problem with the commercial software ANSYS are identified. In conclusions, recommendations for treating the problem are proposed.

Iaith wreiddiol	Saesneg
Tudalennau (o-i)	2295-2302
Nifer y tudalennau	8
Cyfnodolyn	Journal of the European Ceramic Society
Cyfrol	36
Rhif cyhoeddi	9
Dyddiad ar-lein cynnar	17 Chwef 2016
Dynodwyr Gwrthrych Digidol (DOIs)	https://doi.org/10.1016/j.jeurceramsoc.2016.01.040
Statws	Cyhoeddwyd - 01 Awst 2016

Mynediad at Ddogfen

10.1016/j.jeurceramsoc.2016.01.040

Analysis of the maximum friction law for green body forming in ANSYS environmentLlawysgrif awdur wedi’i dderbyn, 1.03 MB

Cysylltiad parhaol

Dolen barhaus

Ffeiliau eraill a chysylltiadau

http://hdl.handle.net/2160/36518

Dyfynnu hyn

@article{09e5b84bdfc64f608657c5711fe49e10,

title = "Analysis of the maximum friction condition for green body forming in an ANSYS environment",

abstract = "Axisymmetric extrusion of an elasto-plastic material with the maximal shear stress condition between the material and the forming tool is considered. The elastic component of deformation is assumed negligible in comparison with its plastic part. Challenges related to the numerical modeling of such a problem with the commercial software ANSYS are identified. In conclusions, recommendations for treating the problem are proposed.",

keywords = "green body, forming process, maximal friction law, singular , strain, ANSYS",

author = "Maurizio Facchinetti and Wiktoria Miszuris",

note = "This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.jeurceramsoc.2016.01.040",

year = "2016",

month = aug,

day = "1",

doi = "10.1016/j.jeurceramsoc.2016.01.040",

language = "English",

volume = "36",

pages = "2295--2302",

journal = "Journal of the European Ceramic Society",

issn = "0955-2219",

publisher = "Elsevier",

number = "9",

}

TY - JOUR

T1 - Analysis of the maximum friction condition for green body forming in an ANSYS environment

AU - Facchinetti, Maurizio

AU - Miszuris, Wiktoria

N1 - This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.jeurceramsoc.2016.01.040

PY - 2016/8/1

Y1 - 2016/8/1

N2 - Axisymmetric extrusion of an elasto-plastic material with the maximal shear stress condition between the material and the forming tool is considered. The elastic component of deformation is assumed negligible in comparison with its plastic part. Challenges related to the numerical modeling of such a problem with the commercial software ANSYS are identified. In conclusions, recommendations for treating the problem are proposed.

AB - Axisymmetric extrusion of an elasto-plastic material with the maximal shear stress condition between the material and the forming tool is considered. The elastic component of deformation is assumed negligible in comparison with its plastic part. Challenges related to the numerical modeling of such a problem with the commercial software ANSYS are identified. In conclusions, recommendations for treating the problem are proposed.

KW - green body

KW - forming process

KW - maximal friction law

KW - singular

KW - strain

KW - ANSYS

UR - http://hdl.handle.net/2160/36518

U2 - 10.1016/j.jeurceramsoc.2016.01.040

DO - 10.1016/j.jeurceramsoc.2016.01.040

M3 - Article

SN - 0955-2219

VL - 36

SP - 2295

EP - 2302

JO - Journal of the European Ceramic Society

JF - Journal of the European Ceramic Society

IS - 9

ER -

Analysis of the maximum friction condition for green body forming in an ANSYS environment

Crynodeb

Mynediad at Ddogfen

Cysylltiad parhaol

Ffeiliau eraill a chysylltiadau

Ôl bys

Dyfynnu hyn